Drain-Titan Double Suction, Urethane Lined Sump
Standards
• Flowserve
Operating Parameters
• Flows to 160 m3/h (700 gpm)
• Heads to 40 m (130 ft)
• Pressures to 4 bar (55 psi)
• Sizes from 40 mm (1.5 in) to 100 mm (4 in)
• Solids to 15 mm (0.5 in)
• Double suction, urethane coated wet-end
• Robust, integral unit construction
• Large diameter, stiff cantilever drive shaft
• No submerged bearings or seals
• Double sided impeller with pre-set clearance
• Keyed and bored shaft coupling
• Standard single lip oil seal
• Urethane lined, slotted outlet pipe flange
• Grease lubricated, single row deep groove ball bearings
• No priming required
• Run-dry capability
flowserve pump